Different types of materials used to make toys – fabric, hard plastic, metal, or rubber – need different cleaning methods.
All toys don’t come with instructions for cleaning, but you can follow a few simple, common-sense ways to keep your baby safe from likely health hazards. Let’s explore some ways to clean babies’ toys.
If the label on your baby’s stuffed bear says it’s water-safe, you can wash it in a sink and let it drip dry on a drainer. Alternatively, you can just chuck it into the washing machine and have it come out squeaky clean.
Steps To Follow For Machine Washing
Check your stuffed toys for any split seams or spots. Mend if any.
Zip them into a mesh wash bag and place in the washer along with a couple of towels or other soft fabric items that need washing.
Use a mild detergent and wash on a delicate cycle.
Dry the soft toys on your dryer’s stationary rack. Better still, put them out in the sun to air dry
Steps To Follow For Surface Cleaning
If teddy doesn’t look overly grubby, just spot clean. Dip a clean washcloth in soapy water, partly wring out, and wipe the toy. Rinse very well.
Run a small hand-held vacuum cleaner over the toy to suck out embedded dust.
Make a diluted solution of very little mild detergent and water and work into a lather. With a sponge, skim off only the suds, and lightly rub the soiled portions of the toy.
Wipe clean with a cloth.
Rinse off the solution with another washcloth or sponge dampened with water.
Dry the toy immediately with a clean towel; alternatively, you could use a wet/dry vacuum cleaner to suck out the remaining moisture.
Place the toy in an area with effective air circulation and let it dry out over a couple of days.2
2. Machine Wash Or Dry Clean Fabric Toys
Cloth dolls filled with polyester fiber can be washed just like stuffed animals in a washer (read the label to make sure). With some dolls, you can detach their heads and wash only the body. You could place the doll in a pillow cover before washing so that the stitches on its feet and hands remain intact. Doll clothes should be hand washed in a mild detergent-and-water solution.3
Don’t pop fabric toys which have a battery pack or make sounds into a washing machine as this will render them silent.
While some fabric toys may need hand-washing, others can be “dry cleaned.”;You will need:
An old pillow cover
500 g wheat bran (unprocessed)
Fill the pillow cover with bran and place the toys inside. Hold the cover tightly closed and shake vigorously for at least 5 minutes. Remove the toys from the pillowcase and brush out the excess bran on the toys
3. Wash Plastic Toys And Wipe Wooden Toys Clean
Never soak wooden toys in water as this can cause the material to warp.
Most plastic toys need only be washed with mild soap and water, rinsed well, and towel dried. Wooden toys, on the other hand, can be washed with a natural cleaning solution (see our recipe below) or a mix of baby soap and water. Wipe thoroughly with another damp cloth.5
4. Wash Bath Toys;With White Vinegar Solution
When shopping for bath toys, look for products that don’t have a hole in the bottom as these tend to harbor more bacteria and mold.
Soak your baby’s bath toys about once a week in a 50:50 mixture of hot water and distilled white vinegar. Rinse and air dry. Wash bath books with soap and warm water and stand them upright with the pages separated for quicker drying. If they are dishwasher-safe, bath toys can be put in the dishwasher as well. This will get rid of any residual mold and bacteria.6
5. Hand Clean Metal Toys Or Use A Dishwasher
On a pair of old pantyhose, place 2 drops of baby oil and wipe the toys clean to remove food stains and grime. Wipe the toys again with another clean cloth. Using baby oil prevents metal toys from rusting as well.7
The type of metal toy you have will determine how it’s to be cleaned. Many metal toys can safely go into a dishwasher. However, if they have flimsy rubber parts like car or truck wheels, avoid this method of cleaning to prevent the heat from disintegrating the rubber. Instead, opt for hand cleaning with a natural solution or diluted bleach – 1 tablespoon bleach should work for a quart (4 cups) of water. Air dry.
6. Disinfect Toys, Especially When Baby Is Unwell
If your baby is sick and the pediatrician says it’s an infectious ailment, take extra care to keep the toys clean and disinfected. This is even more important when there are other children in the family. Here are a few tips:
Most baby toys can be cleaned with mild soap and water and then disinfected with alcohol. Some experts even recommend a mild bleach solution (1 part bleach to 10 parts water) as an alternative to alcohol.
Many washing machines have a disinfecting or sanitizing setting. Use this if you are machine washing fabric or stuffed toys. If you’ve used a hot cycle on your machine, the toys don’t need to be disinfected again.
The same goes for hard plastic toys cleaned in the dishwasher – they don’t need additional disinfection.
Plain white vinegar, diluted with plenty of water, is yet another mild disinfectant you can try. Before using, do a spot check on the toy for color fastness and also to ensure it doesn’t cause any other damage.
Baking soda is another effective cleaning and disinfecting option. Dip a moist washcloth in baking soda and sponge the toys that need cleaning. Now, rinse with clean water. Soda helps remove unwanted odors too.
To hand clean hard plastic toys, scrub them thoroughly in lukewarm soapy water. Use a brush to get at tiny crevices. Turn on the hot water tap and rinse the toy well. Keep a mild bleach solution ready and dunk the toys in the solution. After 10 minutes, take out the toys, rinse them in cool water, and leave on a rack or in the sun to air dry.
Babies’ toys that cannot be washed, such as some dolls, should be kept away from other children so that there’s not too much handling